Easycomposites släppmedel 500ml

Produktbeskrivning

Easy-Lease™ är ett kemiskt släppmedel för semipermanent; ger en exceptionell tätning och släpp egenskaper för en massa olika typer av resin och formmaterial. Tack vare den enkla förlåtande appliceringen får du en yta som bygger minimalt och ger hög-glans kvalité.

• Funkar på alla standard resiner och gel-coats, polyester, vinyl, epoxy etc
• Fungerar även på alla standardverktyg so som epoxy, PU, polyester, vinyl, aluminium, rostfritt stål, glass etc.
• Kan även användas vid värme upp till 175 grader.

Anvisning för användning på engelska

Apply the Easy-Lease Chemical Release Agent in a thin film over the surface of the mould using a small piece of lint-free cloth.

Unlike many other chemical release systems Easy-Lease does not require the use of a separate mould sealer prior to application; providing ultimate reliability and simplicity.

Once the film begins to evaporate (5-30 seconds) use a second piece of cloth lightly in a circular motion to remove the excess and even-out the film.

On a new mould apply 6 coats leaving a minimum of 15mins between each application. Leave the final coat for at least 1 hour before using the mould.

Note: Large mould surfaces may need to be done in stages to avoid evaporation, depending upon working temperature and mould complexity around 0.5sqm should be considered the maximum area per application.

Easy-Lease Chemical Release Agent is a semi-permanent release agent meaning it is capable of multiple releases. For ambient temperature operations using normal resins and mould surfaces 5-10 'pulls' from a mould should be expected. As soon as there are any signs of the release quality diminishing re-apply one coat to restore the performance

Because this release agent is very fast and simple to apply, for very complicated parts, or more aggressive processes such as prepreg and resin infusion, we would advise applying a coat between every release.